PixelArt
- 432 (72x6) individually controllable pixels
- Tricolour SMD LED
- 15mm pitch (maintainable across consecutive fixtures)
- Can be placed at angles of up to 15° (x or y axis)
- Removable mounting plates allowing customisation
- Minimum luminous intensity 910mcd/pixel for full white (approx 4000NITS
- 16 bit per colour LED drive system
- 900Hz refresh rate
- Viewing angle of 160° both horizontal and vertical
- Configurable rotation in 90° increments
- Automatic fixture addressing
- On board diagnostics provides data and power information
- Firmware upgrades via VideoMapper
- Low overall power consumption (100W max)
- Operating voltage 110V - 240V
- Size 1080x90x65mm (42.51x3.54x2.55”)
- Light Weight 3kg (6.6 lbs)
Connectivity
- Standard Cat5e cabling for data signal
- 1 + 1 data path protection
- Daisy chain power and data
- Built-in PowerCon cabling
VideoMapper (VM 1+1)
- VideoMapper streams a video source out to the attached fixtures
- 2U rack mounted unit with detachable mounting brackets
- 1 protected output port (2 ports 1 main + 1 protection)
- DVI and VGA video input
- 24-bit colour input
- Input can be configured to take part or all of the video area
- DVI output port provides method of monitoring live output
- Each video port supports 120,000 pixels at 25 frames per second
- Video ports utilise our high bandwidth protocol
- The system is configured from a PC (a Mac version is in development)
- Ability to prepare the layout very precisely in a spreadsheet
- The VideoMapper presents itself as a standard monitor
- Software download
PixelArt is a modular LED video product allowing designers to build their own custom display surface. Each batten consists of 6 by 72 tri-coloured LED pixels, each pixel being individually controllable. The VideoMapper streams a video source out to the attached fixtures.
PixelArt Batten (72x6)